AI summary by TwinMind
Adam Savage Uses a 10,000 Lb Quick Release To Drop a Car | Mythbusters Jr. | Science Channel
Science Channel
9m 0s
Equipment Setup and Preparation
- Custom giant bungee made from multiple raw rubber strips
- Rubber capacity: 400% stretch
- 12-foot long bungee for 10-foot car suspension
- Heavy steel trench plates preparation
- Weight: 1,300 pounds each (equivalent to 14 people)
- Moved using forklift and pigtail technique for safety
- MythBusters £10,000 quick release system
- Used for 15 years in various experiments
- Activated by pneumatic cylinder with air tank
- Previously used in car drop vs race test and elevator death myth
First Drop Test - Car Only
- Car fitted into hefty sling for hoisting
- Center of gravity determined through slight lift
- Bungee stretched extensively before achieving liftoff
- Initial doubt about car lifting capability resolved
- Test execution: gravity defying car drop in 3-2-1 countdown
- Car completely destroyed in landing
- High-speed footage analysis results:
- 476 frames recorded
- 95.2 milliseconds hover time achieved
Second Drop Test - Car with Equivalent Weight
- Added water vessel equivalent to car weight at top of bungee
- Theory: equivalent weight at top increases hover time
- Initial test failure due to safety pin/electronics malfunction
- 6 tons suspended mid-air creating dangerous situation
- Air leak identified and repaired
- Successful second attempt execution
- Car split completely in half on impact
- Water cascade visible during drop
- High-speed analysis results:
- 732 frames recorded
- 146.4 milliseconds hover time achieved
Results and Conclusions
- Car alone: 95 milliseconds hover time
- Car with equivalent weight: 146 milliseconds hover time
- 51.4 millisecond improvement (54% increase)
- Confirmed hypothesis: adding and distributing weight increases hover time
- Experiment deemed successful despite car destruction
