AI summary by TwinMind

ASML's High-NA EUV Lithography: A 2024 Update

Asianometry

19m 14s

High-NA EUV Technology Overview

  • ASML's next-generation lithography product marketed as machine to save Moore's Law
  • Shipped one early machine to Intel in 2024 for testing
  • Planning 20 High-NA EUV machines per year by 2028
  • Raises numerical aperture (NA) from 0.33 to 0.55
  • Theoretically shrinks half-pitch lines 64% to 7.5-8nm
  • Cannot expand 6-inch EUV photo mask standard, required larger projection lenses

Field Size and Stitching Challenges

  • Mask field size cut in half to 26x16.5mm
  • Requires "stitching" for dies larger than field size
    • Cut original design into two masks with overlap
    • Stitching region receives double exposure
    • Overlay precision less than 1 nanometer required
  • EUV photo mask has borders creating reflectivity issues (1-3%)
  • Mechanical stresses from multi-layer deposition cause placement errors
  • Double exposure hurts image contrast for contact holes
  • Design cutting strategies:
    • Smart cuts retain certain polygons across borders
    • Stagger cuts have jagged shapes for easier printing
    • Moving critical structures away from stitching areas

Chiplet Strategy Benefits

  • A15 Bionic chip (iPhone 13): 8.58x12.55mm - larger than field size
  • Skip stitching by using smaller compute chiplets with High-NA EUV
  • Use advanced packaging for additional chiplets on less sophisticated nodes
  • Example: AMD MI300 approach

Resist Technology Challenges

  • Thinner depth of focus requires 40-60% thinner resist layers
  • Current Chemical Amplified Resists (CARs) used since 1990s
    • Relatively transparent to 13.5nm EUV light
    • Cutting CAR layers by 30-50% introduces 3-7x more defects
    • Resolved images become fuzzier with more noise
  • Metal Oxide Resists (MORs) emerging as alternative
    • Print features with less line width roughness
    • Use less EUV light, improving throughput
    • Tin content provides etch resistance
    • Issues with atmospheric conditions between exposure and bake steps
  • Tokyo Electron's Enhanced Sensitivity Developer Technology (ESPERT) for defect fixing

Metrology and Inspection Requirements

  • Stochastic failures becoming more frequent
  • More measurements needed to find and flag failures
  • Smaller resolutions bring down minimum defect size
  • Linewidth roughness measurement in sub-nanometer dimensions
  • Resist layer consistency challenge (10-30nm thick)
  • Shift from optical to electron beam-based metrology
  • IMEC integrating transmission electron microscopes into production lines
  • "Massive Metrology" - reviewing many features simultaneously
  • Hitachi-IMEC collaboration: inspect million contact holes at once

Computational Lithography Evolution

  • Anamorphic lenses demagnify one side more than other
  • Hole in middle of final projection lens
  • Effects of thinner resist layers must be incorporated
  • NVIDIA's KTHO library for computational lithography
    • Optical proximity correction (OPC)
    • Inverse lithography technology (ILT)
  • TSMC and Synopsis using KTHO algorithms in Proteus mask synthesis
  • Hotspot detection becoming more critical
    • Areas susceptible to open/short circuits
    • Traditional pattern matching misses new hotspot types
    • Machine learning methods generate false positives

Throughput and Power Source Limitations

  • Cost of ownership = depreciation cost / (throughput × utilization)
  • Throughput measured in wafers per hour
  • Resolution increase without power source upscaling reduces throughput
  • Need more photons to overcome stochastic effects
  • ASML hasn't raised power source enough to compensate for resolution
  • Plans to change drive laser and accelerate tin droplets to 60,000/second
  • No existing instruments or modeling software for molten tin behavior at high pressures
  • US National Institute of Standards and Technology working on solution

Market Adoption and Economics

  • High-NA EUV's biggest competitor: multiple passes of standard low-NA EUV
  • $300 million cost per High-NA EUV machine
  • Economics not yet in High-NA's favor
  • Intel trial running devices with ASML
  • TSMC hasn't started bulk purchasing, waiting for cost of ownership improvements

Industry Ecosystem Challenges

  • High-NA EUV ecosystem still immature
  • Half-sized field requirements
  • Need to change entire resist stack
  • Gaps in current metrology and inspection
  • Directed Self-Assembly (DSA) nano-patterning technique potential solution
    • Can heal defects smaller than pitch
    • Reduces number of errors

ASML's Strategic Considerations

  • System integrator role sourcing parts from broad supply chain
  • Dependent on supplier cooperation for future roadmap
  • Mask makers refuse to expand mask sizes without TSMC and Samsung agreement
  • Similar to 450mm wafer upgrade problem
  • Potential argument for bringing more components in-house
    • Would expand company breadth and dilute focus
    • Could help avoid major headaches and accelerate development

TwinMind

Get summaries like this for your own meetings

TwinMind takes notes in the background during meetings, lectures, and calls, then writes the summary for you.

Free plan to get started

No bot joins your calls

Phone, desktop & Chrome apps

Your next meeting, summarized like this

TwinMind listens in the background and turns meetings, lectures, and calls into searchable notes you can chat with. Start free.

Available on phone, desktop & Chrome

Your next meeting, summarized like this

TwinMind listens in the background and turns meetings, lectures, and calls into searchable notes you can chat with. Start free.

Available on phone, desktop & Chrome

Your next meeting, summarized like this

TwinMind listens in the background and turns meetings, lectures, and calls into searchable notes you can chat with. Start free.

Available on phone, desktop & Chrome