AI summary by TwinMind
China’s “New” EUV Light Source
Asianometry
15m 58s
Huawei EUV Announcement Background
- Social media reports Huawei testing China domestically developed EUV machine
- Uses laser induced discharge plasma (LDP) EUV light source
- Contrasts with ASML's laser produced plasma (LPP) method
- Claims LDP is more efficient, smaller, simpler, better energy efficiency than LPP
- Limited information available on machine specifications
EUV Light Source Fundamentals
- Target: 13.5 nanometer light production
- ASML's LPP process:
- CO2 laser hits tin droplet twice
- First pulse flattens droplet to disc shape
- Second powerful pulse creates tin plasma
- Plasma emits 13.5 NM light
- Optical system challenges:
- 6-10 mirror reflections required
- Each mirror reflects <70% of EUV light
- Requires high photon generation (measured in Watts)
- Initial goal: 250 Watts minimum for economic viability
Historical EUV Light Source Development
- Early 2000s: LPP had serious problems
- Unstable CO2 laser hitting microscopic tin target from meters away
- Community considered this extremely difficult
- Alternative explored: Discharge Produced Plasma (DPP)
- Strong electrical current discharge between electrodes
- Creates "lightning bolt" effect
- Vaporized fuel pre-ionized between electrodes
- Powerful capacitor bank provides discharge
- Current flows along z-axis creating magnetic field
- Field constricts particles creating plasma
- Temperatures up to 200,000°C
- Called "Z pinch" - same tech investigated for nuclear fusion in 1950s
Early DPP Research Organizations
- Extreme Ultraviolet Lithography System Development Association (EUVLA) - Japan
- Large joint organization with Japanese companies/academics
- Philips Extreme UV - joint venture
- Philips + Fraunhofer Institute for Laser Technology
- Fuel options explored: Xenon, tin, lithium
- EUVLA studied Xenon DPP
- Philips championed tin DPP
- Lithium rejected due to diffusion/poisoning issues
DPP Performance Characteristics
- Xenon fuel DPP sources used in early prototypes
- Micro exposure tool (2004)
- Intel and Sematech R&D labs
- Tin emerged as best candidate:
- More ions produce light at 13.5 nanometers
- Less light absorption by own ions
- 2% wall plug power conversion vs 0.5-0.9% for Xenon
- DPP advantages: Simple method, early shipping (2003)
- Major limitation: Repetition rate scaling
- Thousands of discharges/second needed for 120 wafers/hour
- Thermal damage concerns for electrodes
- Tin vapor condensation on cold surfaces
Evolution to LDP Technology
- Mid-2000s: Philips Extreme UV evolved DPP → LDP
- LDP setup features:
- Two rotating tin supply discs as electrodes
- Connected to large energy storage capacitors
- Discs rotate through temperature-controlled liquid tin baths
- Pulsed CO2 or neodymium YAG laser fires at tin film
- Creates tin cloud "pre-plasma" between electrodes
- Electric discharge generates Z pinch for hot dense plasma
- LDP advantages over LPP:
- Guaranteed laser-tin contact (vs missing droplets in LPP)
- Heat mitigation through liquid tin bath cooling
- Foil trap for debris mitigation
Commercial LDP Development
- 2005: Japan's USHIO bought 50% of Philips Extreme UV
- 2008: USHIO purchased remaining 50%, renamed to Extreme Technologies
- 2010: Revealed tin DPP Source Collector Module (SCM)
- 20,000 amp discharges
- Lightning strikes lasting few hundred nanoseconds
- 10,000-100,000 discharges per second
- Adjustable pulse repetition rate and energy
- ASML initially used LDP in first Alpha demo tool
- ASML monitored both methodologies:
- LDP through Extreme Technologies
- LPP through Cymer and Gigaphoton startups
LDP Performance Limitations
- 2008: Extreme announced 500 watts EUV power at plasma
- Power measurements:
- "At plasma": power at light source stage
- "At intermediate focus": power reaching wafer after reflections
- SCM performance with standard collector: 14 watts at intermediate focus = 7-8 wafers/hour
- With improved collector: 34 watts (still below competitors)
- Competitor performance:
- Cymer: 250 watts at intermediate focus
- Gigaphoton: 104 watts at intermediate focus
- To achieve 500 watts at intermediate focus:
- Would need 4,000 watts at plasma
- Requires 50,000 pulses/second at 80mJ per pulse
- Possibly too much heat generation to manage
- Physical limitations observed:
- Higher power input created larger (not brighter) plasma
- Larger plasma exceeded collector mirror capture capability
- Energy waste similar to Xenon plasma studies
ASML's Technology Choice
- ASML switched from LDP to LPP
- 2011: USHIO achieved 30 watts at intermediate focus (up from 14 watts)
- By then ASML had committed to LPP path
- Community continued debating choice through 2014
- USHIO continued LDP for mask blank inspection tools
- 2022: USHIO tools showed ~250 watts at plasma (likely local maximum)
- LPP scaling success:
- ASML San Diego team hit 740 watts EUV power
- Expected productization soon
Current Chinese EUV Development
- China pursuing multiple EUV light source methods:
- LPP, free electron lasers, laser assisted discharge plasma
- 2023: Research from Harbin Institute of Technology
- School of Aeronautics and Astronautics
- Small research cluster working on DPP/LDP since early 2010s
- Multiple Chinese organizations investigating LDP plasma dynamics
- Published research appears unimpressive:
- Lower conversion efficiencies than 2005-2006 setups
- Likely hiding actual capabilities
Technology Assessment and Predictions
- China will eventually achieve EUV capability
- Massive funding and talent allocation
- Benefit of knowing technology works
- Access to published research on "golden path"
- Conceptual knowledge represents ~60% of development
- Initial Chinese EUV machines likely:
- Not economically competitive with ASML initially
- <100 wafers/hour throughput
- Worse resolution than ASML
- May be ridiculed as "boondoggle" or "toy"
- Potential innovations:
- Clever twists to overcome brightness limitations
- Novel two-mirror optic systems
- ASML should study and consider integrating innovations
- Chinese/Asian advantage: Tolerance for years of unprofitable operations
- ASML's current gross margins: ~51%
- Margins may need reduction to compete with Chinese challenge
Alternative EUV Research
- Russian academics exploring 11.2 nanometer EUV light
- Using ruthenium-beryllium mirrors
- Unlikely to scale but demonstrates continued innovation
- Acknowledgment that early researchers didn't have all answers
