AI summary by TwinMind
Discover The Fascinating World of Watercraft Manufacturing | How It's Made | Science Channel
Science Channel
9m 45s
Product Overview
- New generation personal watercraft with unique capabilities
- Dives underwater, remains submerged at 3+ feet depth for up to 1 minute
- Leaps into air, rolls with waves, barrel rolls
- Painted to look like vintage fighter jet
- Engineered to return to upright position, doesn't capsize
- Self-righting design for safety
Main Body Construction (Fuselage)
- Gel coat sprayed into mold for shiny fiberglass surface
- Vinyl ester resin applied with brush/roller for water resistance
- Chopped strand mat (long fiberglass strands) draped over mold
- Binder dissolves on resin contact, softens to mold contours
- Excess material trimmed
- Complete saturation with resin, rolling removes air bubbles
- Top and bottom halves lined identically
- Dorsal fin mold bolted to back of top half
- Two mold halves joined with crane assistance, locked with bolts
- Worker enters through cockpit opening to apply more resin
- 8 layers of fiberglass built up, each saturated with resin
- 1-hour working time before resin hardens
- 3-hour cure time produces solid seamless fuselage
- Crane lifts completed fuselage onto dolly
Fiberglass Cutting Process
- Automated cutting machine processes two fabric types:
- Top: strong tightly woven fiberglass
- Bottom: chopped strand mat
- Blades cut various shapes/dimensions for different vessel parts
- Large rectangles specifically for watercraft sides
- Thicker material provides strength, thinner aids adhesion
Sacrificial Nose Construction
- Cone-shaped front bumper with only 3 fiberglass layers
- Designed to collapse in collisions
- Also known as "sacrificial nose"
- Adhesive putty applied, slid onto fuselage front, screwed in place
Fin Manufacturing
- Fin-shaped molds lined with fiberglass
- Liquefied plastic poured into cavity
- Steel wing shaft anchored in fin with plastic
- Shaft pressed into liquid plastic, end protruding
- Second mold with fiberglass lining and plastic core placed on top
- Assembly bolted together for curing
Support Structure
- Triangular aluminum square tubing scaffold
- Framework clamped to work table for welding stability
- Scaffold tower welded to base
- Holes drilled for bushings to attach fins
- Test fit confirms exact dimensions
- Dummy wing shafts used for correct positioning
- Scaffold sits plumb to watercraft base
Engine Installation
- 300 horsepower engine
- Dry fit performed to confirm alignment
- Engine temporarily removed for final paint/artwork
- Air tubes connected to snorkel fins during dry fit
Cockpit Construction
- Gel coat sprayed onto form, covered with fiberglass
- Computer-driven router carves marine grade plywood for structural backing
- Adhesive putty applied to plywood parts
- Plywood pressed to cockpit glued areas
- Resin brushed onto plywood front
- Cockpit section cut in two, parts glued inside fuselage
- Hatch frame inserted in cockpit rim, bound with liquid plastic and adhesive putty
Surface Preparation & Components
- All fiberglass parts sanded to remove bumps/blemishes
- Engine hatch primed and fitted
- Hatch verified to sit flush with fuselage
- Exhaust outlet installed in rear hole
- Elevator fins slide into rear bushings for pitch axis control
- Jet propulsion system installed
Control Systems
- Control pedals bolted to cockpit floor
- Cables run to jet propulsion unit, elevator fins, steering system
- Control panel positioned above pedals
- Metal linkage connects dive fins to control stick
- Control stick tested for easy, correct dive plane movement
Final Assembly
- Dive fin scaffold powder coated yellow, reinstalled
- Dive fins connected to scaffold
- Lightweight carbon fiber bucket seats minimize load for speed
- Rubber gasket tucked into clear canopy framework
- Sealant bead applied where gasket meets window frame
- Thick aircraft grade acrylic canopy, tinted for sun protection and cooling
