AI summary by TwinMind
How Air Hockey Tables Are Built | How It’s Made
Science Channel
5m 10s
Air Hockey Game Development & Mechanics
- Developed late 1960s/early 1970s by American billiard engineers
- Puck floats on thin air cushion, propelled by players at each end
- No friction creates high-speed gameplay
- Puck levitates slightly via constant airflow through playfield perforations
Playfield Construction
- Made from laminated composite material with air-hockey graphics
- Computerized drill cuts 3 playfields simultaneously in consistent pattern
- Holes slightly larger than pin holes: over 4,600 perforations per playfield
Base Board Preparation
- Automated tool carves grooves in medium-density fiber board sheet
- Board serves as playfield base
- Air circulates in grooves, exits through playfield holes
- Sawdust blasted from grooves after carving
Laminate Application Process
- Grooved fiberboard moves through glue applicator
- Rubber roller coats board top with minimal glue (prevents seepage into grooves)
- Technicians stack boards after glue application
- Laminate applied and aligned with fiber board grooves
- Cardboard cover placed on laminate for protection
- Stack moves through press for adhesion during glue curing
Side Panel Graphics & Assembly
- Craftswoman applies stick-on graphics to side apron boards
- Opens pre-cut slot for coin door
- Exposes bolt holes
- Cuts maintenance access slot, removes panel for door
- Numbers door and side apron piece for later matching
Table Frame Assembly
- Technician applies artwork to end panels
- Assembles curved corner parts
- Links metal brackets to side apron parts
- Installs puck deflector bracket in center of end panel
- Screws down corner connectors
- Sets end panels upside-down on work surface
- Attaches side boards to corner connectors (completes table apron)
Interior Components Installation
- Locked door installed in plywood floor (interior storage compartment)
- Craftsman installs and secures coin door
- Mounts wire speakers for sound effects
- Installs computerized optical system for puck movement tracking
- Wooden panels fitted to structure
- Flashing lights and sensor activators installed
Air System Installation
- Team flips playfield to work on back
- Technician attaches board above open grooves (creates airflow chamber)
- Motor and fan installed over small opening
- System blows air into grooves and playfield perforations
Final Assembly
- Playfield turned over, lowered onto table structure
- Aluminum bumpers attached to table border as puck barriers
- Goal puck deflectors installed on ends
- Metal plates screwed over deflector cups
- Locks installed on each goal compartment (prevents puck theft)
- Air-hockey table assembly complete
