AI summary by TwinMind
How Clay Targets Are Made | How It’s Made
Science Channel
5m 4s
Clay Target Overview
- Clay targets designed for single-use destruction
- Manufactured in multiple colors as inverted saucers
- Used as practice targets, launched by hand or automated machines
- Also called "clay pigeons" but not made of actual clay
- Made with pitch, ceramic-type material, or resin
Company Background
- French company producing clay saucers since 1920s
- Serves target practice and competitions including Olympics
- Founder invented first automated target molding machine in 1947
Material Composition
- Pitch targets made from petroleum pitch (derived from crude oil) + calcium carbonate (talc)
- Talc serves as filler
- Petroleum pitch acts as binding agent, solidifies into hard brittle material
Manufacturing Process - Material Preparation
- Talc arrives heated to 176°F
- Technician transfers talc from truck to heated storage silo
- Screw conveyor moves talc from silo to blender tank
- Petroleum pitch arrives heated to 392°F
- Pitch transferred to heated storage
Manufacturing Process - Mixing
- Every 10 seconds: 22 lbs petroleum pitch + 64 lbs talc released into blender
- Materials cool when leaving heated silos
- Gas boiler reheats ingredients in 509°F oil
- Hot oil circulates in pipes around blender
- Heats pitch-talc mixture to ~390°F
- Process changes consistency to paste
Manufacturing Process - Molding
- Paste flows from blender to automatic molding machine
- Valve cuts flow at regular intervals for timed injections into target-shaped molds
- Machine compresses paste while cooling with water
- Transfer device moves targets onto conveyor belt one at a time
- Targets remain soft and pliable despite hot molds
- Separating device lines up targets as they cool and harden
Paint Manufacturing
- Paint made primarily of carbonate + biodegradable powdered pigment
- Technician adds pre-measured water + pigment bag to mixer
- After blending, pre-measured carbonate added with binding/thickening agent
- Additional blending completes paint preparation
Painting Process
- Targets move from conveyor to spinning holders
- Spinning holders carry targets through paint chamber
- Sprayer coats spinning targets inside chamber
- Targets exit chamber wet and cooled
- Separator divides targets onto two conveyor belts
- Conveyor belts carry targets through hot air drying
- Final conveyor feeds targets to stacking machine
Target Specifications
- Multiple sizes manufactured
- Olympic regulation size: largest, 4-inch width
- Smaller training targets: under 4-inch width
- All sizes engineered for stable flight following intended trajectory
