AI summary by TwinMind
How Gel Capsules & Playground Spring Riders Are Made | How It's Made | Science Channel
Science Channel
9m 58s
Softgel Capsule Manufacturing Process
Quality Testing Phase
- Bacterial Contamination Testing
- Lab technicians dissolve ingredient in solution
- Apply to food source in petri dish
- Incubate for 72 hours to encourage bacterial growth
- Draw samples and examine under microscope
- Must be bacteria-free to proceed
- Contaminant Testing
- Tests for lead, arsenic, mercury, cadmium
- Uses spectrometer machine
- Injects ingredient solution into plasma flame
- Analyzes chemical composition via light wavelength changes
- Must be contaminant-free to proceed
Gel Cap Material Preparation
- Ingredients: gelatin (beef bones), palm oil, glycerin, purified water
- Proportions: top secret
- Industrial blender combines ingredients to uniform consistency
- Heat mixture to 80°C
- Vacuum removes air bubbles
- Ready gel material flows to holding tank
Medicine Fill Preparation
- Example: Vitamin D combined with soybean oil
- Adjust potency to specified strength
- Gel cap material maintained at 60°C in holding tank
- Hose wrapped in heater tape to keep gel liquid
- Vitamin D solution doesn't require heating (doesn't solidify when cool)
Production Line Process
- Two stations simultaneously spread thin molten gel layer across cooling drum
- Gel hardens into solid, malleable sheet (cardboard thickness)
- Each sheet passes over rotating die with capsule-shaped cavities
- Pumps inject required vitamin D quantity into each cavity
- Machine heats gel sheets so they adhere when meeting
- Forms complete capsules with vitamin D sealed inside
- Sharp die edges slice gel caps free
- Capsules fall to conveyor belt
Drying Process
- Initial State: Filled gel caps contain moisture, quite soft
- First Drying: Rotating drum with cool, dry air for 3 hours
- Prevents flattening on surfaces
- Second Drying: Spread on trays for 36 hours
- Makes gel caps hard enough for safe packaging
Packaging Process
- Example: Flax oil gel caps
- Vibrating plates line capsules in single file
- Electronic eyes count capsules per bottle
- Filling mechanism collects and releases into empty bottles
- Plastic twist cap application
- Adhesive-backed labels applied around bottle sides
- Quality control lab tests random samples from production batch
Spring Rider Playground Equipment Manufacturing
Design Requirements
- Must withstand years of rambunctious riders
- Solid and durable construction
- Lightweight enough for toddlers to rock
- Materials: thick steel spring, lightweight aluminum animal
Sand Core Creation
- Two halves made with aluminum mold (duck-shaped)
- Fill with sand and adhesive mix
- Sets into solid block
- Insert steel support rods
- Fill to top, even surface
- Expose two extraction hooks
- Hardens in 20 minutes
Casting Mold Preparation
- Use aluminum pattern for each mold half
- Apply powder release agent to prevent sticking
- Cover pattern with sieved sand and clay mixture
- Mount frame around pattern
- Add more sand, pack down with pneumatic ramming tool
- Remove frame, cover with wooden board
- Press applies weight of 4 mid-size SUVs
- Flip mold, remove pattern
- Sand compacted to hold shape
Casting Process
- Aluminum melting point: 590°C
- Actual heating temperature: 760°C (for faster flow)
- Position 6mm thick foam spacers in cavity
- Place core half on spacers (creates 6mm cavity gap)
- Add second core half with spacers on top
- Lower other mold half
- Pour molten metal through top holes
- Flows through runners into 6mm gap around duck-shaped core
- Cool and solidify for 20 minutes
Finishing Process
- Break mold apart on vibrating sieve
- Shake out core sand through bottom hole
- Cut off excess aluminum from runners
- Grind down seam between mold halves
- Weld aluminum handles for child grip
- Grind weld and sharp edges smooth
- Apply polyester powder coating (rubber ducky yellow)
- 20-minute oven baking for ultra-durable coating
- Airbrush urethane enamel paint details (feet, wings, bill, eyes)
Assembly
- Thick coil made of flexible steel
- Bolt steel spacer plate to spring
- Hide bolts under aluminum cover
- Attach footrest (steel)
- Bolt duck to plate
- All parts painted with baked-on polyester coating
- Spring bolts to concrete block buried underground
- Designed to withstand harsh winters for year-round use
