AI summary by TwinMind
How It's Made: Handcrafted Skis
Science Channel
5m 23s
Mass Production vs Handcrafted Skis Comparison
- Mass produced skis from large companies vs handcrafted skis from small independents
- Preference comparison: major brewery vs microbrewery beer
- Small independent brands called "microbrews" in ski buying guides
- Handmade skis feature exclusive designs, high-end craftsmanship
- Produced in limited quantities by small independent companies
Wood Core Construction
- Core built from two wood types: Colorado aspen and Colorado pine
- Wood harvested from trees killed by pine beetles
- Workers glue together 8-10 pieces depending on ski width
- Forms laminated block structurally stronger than solid wood
- Block clamped in press for 2 hours while glue dries
- Band saw cuts strips from block after press removal
- Each strip becomes ski core
- One block typically makes 6 ski cores
Core Shaping and Sidewall Installation
- Ski cores shaped with router using template underneath ski contour
- Blowtorch applied to ultra high molecular weight plastic strips for bondability
- Plastic coated with epoxy, adhered to each side of ski core
- Creates sturdy sidewall protecting core from side impact
- After epoxy sets, 6 inches sawed off front and back of ski
- Hand planer tapers thickness of ends
- Sidewalls heated again for bond preparation
Tip Spacer and Base Creation
- Plastic core (tip spacer) glued to front of wood core
- Holds parts together during construction
- Hand crank die machine cuts brand name and logo into ultra high molecular weight plastic strip
- Same letters die cut in white, placed in black cutout strip
- This forms ski's base
Ski Assembly Process
- Left and right bases prepared with epoxy spread over entire surface
- Epoxy-saturated fiberglass layer laid down
- Ski core positioned on top
- Epoxy spread on core and tip spacers
- Extra fiberglass placed where bindings will be installed
- Steel plates positioned for binding mounting
- Entire ski covered with another fiberglass layer
- Nylon top sheet with graphic design added
Pressing and Finishing
- Assembly covered with metal sheets and silicon heating blankets
- Placed in custom designed ski press
- Rubber bladders inflate when press activated, pressing wood into ski shape
- 35 minutes pressing time
- Worker separates skis with band saw after press removal
- Jigsaw trims tip and tail
- Rough edges sanded around entire perimeter
- Sidewall tapered and beveled for better edge grip on snow
- Final step: peel off protective film from nylon top
Final Product
- Handmade skis available in several different styles, shapes, sizes
- Only need bindings before ready for use
