AI summary by TwinMind
How the EUV Mirrors are Made
Asianometry
19m 16s
EUV Optics Challenge Overview
- Initial belief: optics would be hardest part of EUV lithography
- Required perfection: wavefront error must be limited to λ/50
- EUV wavelength: 13.5 nm
- Allowable total system error: 260 picometers (13.5 nm ÷ 50)
- Context: single water molecule = 275 picometers wide
- System assumption: 6 mirrors total
- Individual mirror error budget: 106 picometers RMS (260 ÷ √6)
- Mirror surface sensitivity: 4x more sensitive than lens surfaces
- Light deformed twice: hitting surface + reflecting off
- Required surface polish: 53 picometers RMS (106 ÷ 2)
- Equivalent to hydrogen atom radius
- EUV system 20x harder than DUV system (6 mirrors vs 60 surfaces)
Bragg Reflector Principles
- Foundation: 1913 work by Sir Lawrence Bragg and William Bragg
- Bragg equation: quantified crystalline solid behaviors with x-ray reflection
- Constructive/destructive interference principles
- Nobel Prize Physics 1915 (Lawrence Bragg age 25, youngest physics winner record)
- Bragg reflector: stack of multiple alternating reflective layers
- Requires precise D-spacing and correct angle for constructive interference
- Reflections occur at borders between layers
Material Selection for EUV Mirrors
- Best material pairs: greatest refractive index difference
- High atomic number materials: molybdenum, tungsten, gold (optically denser)
- Low atomic number materials: silicon, beryllium, carbon
- Both materials must not absorb EUV strongly
- Typical stack: 50-70 layer pairs
- Each layer pair contributes small reflection → cumulative effect
Layer Specifications and Performance
- Molybdenum layer: ~3 nm thick
- Silicon layer: ~4 nm thick
- D-spacing precision critical: 3% deviation = 36% reflectivity loss
- Maximum theoretical reflectivity: ~70%
- Practical performance: lower due to material interactions
- Molybdenum layers: crystalline structure
- Silicon layers: amorphous structure
- Temperature effects: materials diffuse forming silicide compound
- Silicide absorbs EUV radiation → performance degradation
Substrate Materials and Thermal Management
- Mirror heating during exposure causes expansion/distortion
- Early substrates: glass ceramics (Zerodur, Clearceram)
- Alternative: titanium-doped fused silica (ULE ultra-low expansion glass)
- Ceramics: inconsistent polishing response
- ULE: suffers from striations affecting refraction indices
Historical Development
- 1940s: first nanoscale multi-layers (failed due to diffusion)
- 1971: Eberhard Spiller at IBM researching LED coatings for IBM 3800 laser printer
- Computer simulation program for light emission optimization
- October 1971: fabricated 6-layer mirror (magnesium fluoride + gold)
- 1973: IBM-German collaboration for x-ray telescopes
- 1976: 9-layer copper-gold mirror, 3% reflectivity at 20 nm wavelength
Early Manufacturing Methods
- Electron beam evaporation: vaporizes solid sources into gas
- Advantages: rotating different sources for alternating layers
- Challenge: controlling deposition rate consistency with temperature fluctuations
- Built-in x-ray reflectivity monitoring device
Magnetron Sputtering Breakthrough
- 1978: Spiller met Troy Barbee at Lawrence Livermore National Lab
- Barbee pioneered magnetron sputtering method
- Process: atoms ejected into vacuum after high-energy particle bombardment
- Setup: substrate on rotating table, two magnetron sputtering sources
- Control parameters: power to sources, distance, rotation speed
- Achievement: >60% reflectivity (near theoretical maximum)
- Challenges: stress on nanometer layers, warping effects
Wavelength Selection Decision
- 1985: work caught attention of Hiroshi Kinoshita (EUV lithography pioneer)
- 1986: first reflective EUV system demonstration
- Wavelength candidates: 13.5 nm, 11.4 nm, 6.6 nm, 4.8 nm
- 6.6 nm and 4.8 nm: eliminated due to photoresist limitations
- 11.4 nm: required molybdenum-beryllium (beryllium toxicity concerns)
- Final choice: 13.5 nm with molybdenum-silicon
Production-Level Manufacturing
- 1992: Kinoshita at NTT Labs partnered with Tinsley (SVG subsidiary)
- Aspherical mirrors (non-spherical geometry)
- Four-step process:
- Blanchard rotary grinders for initial machining
- Spherical grinding to aspheric contour
- CNC machining for special features (holes for light passage)
- Traditional optical polishing (lapping)
- Computer Controlled Optical Surfacing (CCOS) for precision polish
- Custom interferometer for measurement/calibration
- Magnetron sputtering for molybdenum-silicon layers
- Peak reflectivity: 65%
Production Scaling
- Livermore National Lab + FCO Instruments collaboration
- Production-level magnetron sputtering tool
- Capability: coat 4 optics simultaneously
- Trade-off: faster coating but more defects
- Critical mirrors (photomask blanks): different method required
Corporate Changes and Ion Beam Figuring
- 2001: SVG sold to ASML (Dutch company)
- US regulatory requirement: Tinsley sold to American buyer (SSG)
- Carl Zeiss became primary optics producer
- Major challenge: substrate polishing to 50 picometers RMS
- Solution: Ion Beam Figuring (IBF)
- Accelerated argon ions toward mirror surface
- Atom-by-atom polishing precision
- Continuous metrology throughout process
- Subnanometer metrology breakthrough enabled precision
Error Classification System
- Three categories by spatial frequency:
- Low spatial frequency (figure error):
- Ripples >1 mm crest-to-crest spacing
- Causes astigmatism-like effects
- Light falls in wrong locations
- Mid-spatial frequency roughness:
- Ripples 1 mm to 1 micrometer spacing
- Creates flares/halos
- Light scatters into dark areas
- High spatial frequency roughness:
- Ripples <1 micrometer spacing
- Reduces reflectivity (1 angstrom roughness = 1% reflectivity loss)
- Across 6 mirrors = 6% total loss
- Low spatial frequency (figure error):
Performance Evolution Timeline
- 2005 Alpha demo tool: 0.2 nm (200 picometers) RMS mid-spatial frequency roughness
- Correlated to ~16% flare
- 2007 Starlith 3100: <0.15 nm RMS
- 2011 Starlith 3300: ~0.05 nm RMS
- 3400: significant reduction
- 3600: performance data not disclosed (proprietary)
Project Outcome
- Steady progress without dramatic breakthroughs
- 2005: confidence Zeiss would achieve targets
- 2012: optics ready for production
- Bottleneck shifted: EUV light source became the showstopper
- Optics problem solved, but production delayed by power source issues
