AI summary by TwinMind

How TSMC Handled an Earthquake

Asianometry

15m 30s

April 2024 Taiwan Earthquake Overview

  • Magnitude 7.2 earthquake at 7:58 AM on April 3rd, 2024
  • Casualties: 13 dead, nearly 1,000 injured (mostly from rockfalls)
  • Semiconductor fabs reported minimal financial impact
  • TSMC and other companies confirmed operations fine
  • Major contrast to devastating 1999 earthquake

Historical Context: 1999 Chi-Chi Earthquake

  • September 1999, magnitude 7.3 earthquake in central Taiwan (Nantou)
  • Casualties: 2,400 dead, 11,000 injured (second worst in Taiwan history after 1935)
  • TSMC, UMC, other electronics companies concentrated in Hsinchu Science Park
  • TSMC losses: 177,000 wafers (50% of monthly production)
  • Industry demand up 40% from 1998, causing supply shortages
  • Total semiconductor industry damages: $10 billion ($18 billion in today's dollars)
  • TSMC represented only 7% of global IC production at the time

1999 Fab Structure and Vulnerabilities

  • Double shell structure design:
    • Outer fab shell: simple one-story with long span roof trusses
    • Inner structure: multi-story reinforced concrete
    • Clean room on top floor, subfab below for supporting equipment
    • Air gap between shells to reduce micro-vibrations
  • Foundation: 2-3m thick concrete, piles driven into soil
  • Civil construction: 3-5% of total fab cost (75-80% goes to equipment)

1999 Earthquake Ground Acceleration Impact

  • Peak Ground Acceleration (PGA): 0.1-0.15 G forces at Hsinchu (100km from epicenter)
  • 2024 earthquake comparison: Hsinchu PGA ~0.14 G, Taoyuan ~0.025 G
  • Equipment movement threshold: 0.2 G forces needed
  • Structural damage minimal except one site on ancient lake bed
  • Most tools unanchored except hazardous chemical equipment

Equipment Damage Analysis from 1999

Vertical Diffusion Furnaces

  • 90% damaged (silica tube damage, position gaps, wafers falling)
  • 3m tall, thin structure susceptible to shaking
  • Used for doping process in semiconductor manufacturing
  • Solutions implemented:
    • Seismic isolation systems (roller ball on rail)
    • Flexible piping systems for gas/electricity connections
    • TSMC installed similar platform by 2013

Stocker Systems

  • Vertical shelves 4-5m tall, aluminum construction
  • Store wafers in FOUPs (Front Opening Unified Pods)
  • Many wafers fell out during 1999 earthquake
  • Improvements: stoppers, braces, dampers installed
  • 2016 southern Taiwan earthquake (6.4 magnitude): 120,000 wafers delayed 10-50 days
  • Floor acceleration doubled at top of stockers due to height
  • New research suggests dampers near top more effective

Chemical Systems and Safety

  • Hydrochloric and sulfuric acid handling
  • Automatic shutdown systems for unnatural vibrations worked properly
  • Wet etch tools splashed chemicals but flowed to disposal systems
  • Sprinkler activation damaged photolithography machines

Retrofit and Modernization Measures

Older Fab Retrofits

  • Viscous dampers installed between external shell and interior structure
  • Hydraulic pistons absorb seismic energy
  • Computer simulations show 20% reduction in clean room floor acceleration
  • Limitations: minimal impact on major earthquakes beyond design parameters
  • Challenges: limited subfab space, no production interruption allowed, no gas welding/dust generation

New Fab Technologies

  • Raised floors for seismic isolation
  • Floating piles for energy dissipation in soil foundation
  • Modern anti-seismic design standards

Early Warning Systems

Taiwan Earthquake Sensor Networks

  • Three networks operated by government/university organizations
  • TSMC likely uses National Center for Research on Earthquake Engineering (NCREE)
  • Seismic wave types:
    • P waves (primary): low intensity, arrive first
    • S waves (secondary): surface acoustic waves, slower but more damaging
  • Warning timeline: 3-17 seconds depending on epicenter distance
  • Seismic waves travel 80km in 15-20 seconds
  • TSMC system installed late 2015/early 2016
  • 2024 earthquake: some early warning systems failed to trigger

Power Infrastructure Impact

1999 Power Disruptions

  • 95% of $10 billion damages from power interruptions, not physical damage
  • Voltage sag from sudden power cuts damages equipment
  • Power restoration prioritized Science Park over residential areas
  • Emergency power systems not designed for extended outages
  • Recovery process: wait for power → evaluate wafers → repair/recalibrate machines (2-3 days)
  • Power interruptions continued 2 weeks after main earthquake

2024 Power Management

  • Taipower shut down 4 generation units for safety checks
  • Eastern Taiwan power cuts, western grid maintained
  • Recent solar and wind buildouts may have helped grid stability

Recovery and Restart Procedures

  • Wafer inspection required
  • Machine testing and calibration
  • Procedure validation runs
  • Several weeks for 100% restoration
  • All-hands-on-deck approach
  • Reports of full parking lots working late into night

TwinMind

Get summaries like this for your own meetings

TwinMind takes notes in the background during meetings, lectures, and calls, then writes the summary for you.

Free plan to get started

No bot joins your calls

Phone, desktop & Chrome apps

Your next meeting, summarized like this

TwinMind listens in the background and turns meetings, lectures, and calls into searchable notes you can chat with. Start free.

Available on phone, desktop & Chrome

Your next meeting, summarized like this

TwinMind listens in the background and turns meetings, lectures, and calls into searchable notes you can chat with. Start free.

Available on phone, desktop & Chrome

Your next meeting, summarized like this

TwinMind listens in the background and turns meetings, lectures, and calls into searchable notes you can chat with. Start free.

Available on phone, desktop & Chrome