AI summary by TwinMind
How Wood Watches and Replica Police Lanterns Are Made | How It’s Made | Science Channel
Science Channel
9m 51s
Stainless Steel Wood Watch Manufacturing
- Watch Overview & Materials
- Mobile phones provide time but watches offer convenience and fashion
- Stainless steel combined with exotic hardwood accents
- Limited edition New York Yankees series featured
- Blue painted maple from original Yankee Stadium wooden seats (opened 1923)
- Wood Preparation Process
- Cut wood strips just over 1/3 inch thick
- Cut into blocks: 3/4 inch by 1/3 inch each
- Blocks used for wood inlays and bracelet links
- Second strip cut nearly 1/4 inch thick
- Cut into nearly 2x2 inch squares for bezels (rings around watch dial)
- Bezel Manufacturing
- Mount squares on lathe, bore hole through middle
- Mount multiple squares on steel mandrel with bezel template
- Steel roughing gouge rounds squares to template diameter
- Cut each bezel to required thickness: about 1/10 inch
- Shave wood from underside to preserve historic blue paint on top
- Watch Case Production
- Cut blank from extruded stainless steel
- Computer-guided machine with 12 different tools
- Continuous lubricant shower during machining
- First tools: bore hole for movement, carve groove for wood bezel
- Final tool: drill holes in lugs for spring-loaded pins
- Watchband Manufacturing
- Computer-guided machine shapes stainless steel bar
- Reduces bar width, carves links, bores holes for connecting pins
- Iron plating applies black finish to all stainless steel parts
- Assembly Process
- Assemble two bands, connect one to watch clasp
- Attach sapphire glass window (exceptionally durable crystal)
- Insert self-winding movement and dial
- Dial: brass sheet with cut-out numbers/indices over luminescent paint base
- Watch glows in dark
- Secure movement with retaining ring, insert crown for setting hands
- Screw on stainless steel case back with sapphire glass window
- Case back engraved with limited edition collection name and series number
- Attach watchband with spring pins
- Wood Inlay Process
- Apply epoxy glue to rectangular recess in each link using toothpick
- Place wooden link piece in each recess
- Same process for dial's wooden bezel
- Set aside 24 hours for adhesive to cure
- Buff entire surface on cloth polishing wheel
- Removes fingerprints, dust, smooths historic wood accents
- Watch automatically winds with wrist movement
Vintage Police Lantern Crafting
- Historical Context
- Pre-electricity era: criminal acts hidden by darkness
- Police officers carried special lanterns pursuing suspects
- Modern craftsmen replicate for movie/TV industries
- Authentic replicas with thick bull's eye lens to magnify flame light
- 19th century police lanterns helped find criminals on shadowy streets
- Door Fabrication
- Start with steel piece, use scribe to trace pattern outline
- Mark notches for hinges and latch
- Etch lens hole shape in center with diagonal lines
- Lines intersect at exact center point
- Punch divot at cross point
- Scribe lines along edges for reinforced border bending
- Cut out hinge and latch notches following pattern lines
- Align center divot with punch, cut lens hole
- Bend wire to match lantern door profile
- Align wire with scribed edge lines, fold metal over
- Bend door to correct curvature
- Main Structure Construction
- Mark vent hole locations following pattern
- Cut vent holes using hand-operated punch
- Roll blank into cylinder (multiple passes for correct curvature)
- Crimp bead around lens holder end to retain bull's eye lens
- Hammer top rim around cap
- Prep surface with flux (chemical cleaning agent)
- Solder joint to secure top to lantern
- Solder raised panel to back for handle support
- Clean solder joints with acetone
- Final Assembly
- Wrap metal hinges around wire through door notches
- Crimp hinges together at ends
- Position door on lantern body, adjust hinges level
- Solder hinges to steel structure
- Insert bull's eye lens assembly into door hole, solder joint
- Pin and solder copper chimney tiers
- Place chimney over top hole, tuck pins into chimney holes
- Install decorative part in top (won't obstruct chimney hole)
- Assemble handles to raised back panel
- File down hardened solder seams
- Test door latch operation
- Tape lens and handles, spray paint lantern black
