AI summary by TwinMind
Lecture 11: Phase Coexistence in Unary Systems
MIT OpenCourseWare
46m 9s
Clausius-Clapeyron (CC) Equation Introduction
- Focus on Chapter 7 of textbook
- CC equation describes slope of coexistence lines in phase diagrams
- Generic phase diagram with Alpha (teal) and Beta (purple) phases
- Coexistence line has slope dP/dT at any point
- Phase stability conditions:
- Alpha stable region: μ_alpha < μ_beta
- Beta stable region: μ_beta < μ_alpha
- On coexistence line: μ_alpha(T,P) = μ_beta(T,P)
Derivation of CC Equation
- For equilibrium maintenance along coexistence line: dμ_alpha = dμ_beta
- Using differential forms:
- dμ_alpha = -s_alpha dT + v_alpha dP
- dμ_beta = -s_beta dT + v_beta dP
- Setting equal and collecting terms:
- (s_alpha - s_beta)dT = (v_alpha - v_beta)dP
- Transformation quantities: Δs = s_beta - s_alpha, Δv = v_beta - v_alpha
- Final CC equation: dP/dT = Δs/Δv
- Alternative form using isothermal equilibrium condition (ΔG = 0):
- ΔH = TΔs for equilibrium transformation
- Therefore: dP/dT = ΔH/(TΔv)
Application to Vapor Pressure
- Vapor pressure curves: condensed phase ⇌ vapor
- Saturation conditions and Le Chatelier's principle
- Increased vapor pressure → condensation
- Decreased vapor pressure → sublimation/evaporation
- System resists external changes through phase transformations
Integration of CC Equation for Vapor Pressure
- General case requires knowing:
- ΔH(T,P), Δv(T,P) functions
- Heat capacities, thermal expansion coefficients
- Volumes, compressibilities for both phases
- Three simplifying assumptions for vaporization:
- ΔH ≈ constant (worst approximation)
- v_gas >> v_condensed → Δv ≈ v_gas (good approximation, ~20,000× volume increase)
- Ideal gas behavior: v_gas = RT/P (good at moderate pressures)
- Results in separable differential equation:
- dP/P × (RT) = dT × (ΔH/T²)
- Leads to logarithmic solutions
Gibbs Phase Rule
- Linear algebra approach: Degrees of freedom = Variables - Independent constraints
- For unary systems: F = 3 - φ (φ = number of phases)
- Applications:
- One phase (φ=1): F=2 degrees of freedom
- Can vary T and P independently within phase region
- Two phase (φ=2): F=1 degree of freedom
- Coexistence line - if T changes, P prescribed by CC equation
- Three phase (φ=3): F=0 degrees of freedom
- Triple point - fixed T and P coordinates
- Water triple point: ~10 Torr, ~273K
- One phase (φ=1): F=2 degrees of freedom
- Four-phase equilibria not allowed in unary systems
- Multi-component systems enable more phases through additional variables
Course Logistics
- End of unary phase diagram treatment
- Wednesday: detailed saturation vapor pressure examples
- Reading assignments complement lecture material
