AI summary by TwinMind

Lecture 18: Case Study in Reacting Gas Mixtures - Introducing the Nernst Equation

MIT OpenCourseWare

48m 21s

Reacting Systems Case Study Introduction

  • Last lecture before exam
  • Focus on reacting systems of ideal gases with detailed case study
  • Time permitting: Nernst equation overview ("nerds in a nutshell")

Generic Reaction Analysis

  • Reaction form: A + B → 2C
  • Specific example: H₂ + Cl₂ → 2HCl (all gas phase)
  • Question: What can we learn from plots of free energy vs composition?

Univariant Reacting System Framework

  • System with only one reaction coordinate
  • All composition changes expressible with respect to single variable (NC)
  • Stoichiometric relationships: dnA = dnB = -½dNC
  • Initial conditions: nA = nA,initial - ½(nC - nC,initial)
  • Total moles: ntotal = nA,initial + nB,initial + nC,initial (fixed for this reaction)
  • Needed for partial pressures: PI = (nI/ntotal) × Ptotal

Gibbs Free Energy Expression

  • G = Σ(ni × μi,ref) + RT Σ(ni ln(ni/ntotal))
  • Reference state: pure components at pressure P
  • System: mixed at fixed T and total P
  • Full expression includes chemical potentials and ideal entropy of mixing

H₂ + Cl₂ → 2HCl Numerical Example

  • Temperature: 298K initially
  • Professor's note: Reaction problematic in semiconductor processing
    • Produces HCl (hydrochloric acid)
    • Corrodes metal equipment
    • Requires expensive quartz/non-metal reactors

Reference Data and Conventions

  • μH₂ = H°H₂ - TS°H₂
  • μCl₂ = H°Cl₂ - TS°Cl₂
  • μHCl = H°HCl - TS°HCl
  • Convention: H° = 0 for elements in standard state at 298K, 1 bar
  • H°HCl ≠ 0 (formation enthalpy from elements in standard state)

Plot Analysis at 298K

  • Initial conditions: 1 mole each H₂, Cl₂; 0 moles HCl
  • G minimized at ~1.5 moles HCl (equilibrium point)
  • Curvature always present (no complete conversion)
  • Due to X log X singularity in mixing entropy
  • Driving force: initial G higher than equilibrium G

Temperature Dependence (328K Analysis)

  • Required data: heat capacities for all components
  • Update enthalpies and entropies using ∫CP dT relationships
  • Overall G decreases with temperature (dG/dT = -S, S > 0)
  • Equilibrium shifts slightly left with increasing temperature

Le Chatelier's Principle Analysis

  • Question 1: Is reaction endothermic or exothermic?
  • Answer: Exothermic (equilibrium shifts left with increasing T)
  • Systems "resist" temperature changes by running in endothermic direction
  • Van't Hoff equation: d ln KP/dT = ΔH°/RT²

Quantitative Enthalpy Estimation

  • Eyeballed equilibrium NC: 1.55 (298K), 1.53 (328K)
  • Calculated nA, nB from stoichiometry: 0.225, 0.235
  • Equilibrium constants: KP = 47.5 (298K), 42.4 (328K)
  • Using KP = (PHCl²)/(PH₂ × PCl₂) and Dalton's law
  • d ln KP/dT ≈ -0.00379 K⁻¹
  • Estimated ΔH° ≈ -3.09 kJ/mol (vs actual -2 kJ/mol used in plot)

Advanced Considerations

  • Temperature series analysis could estimate heat capacity differences
  • Non-constant mole number systems: ntotal becomes NC-dependent
  • More complex but manageable computationally

Nernst Equation Introduction

  • Transition to electrochemistry
  • Daniels cell example (1830s): Zn + CuSO₄ → ZnSO₄ + Cu
  • Separate reduction and oxidation half-reactions
  • Device engineering: electrons and ions follow separate paths

Electrochemical Cell Setup

  • Two beakers with Zn and Cu electrodes
  • Aqueous ZnSO₄ and CuSO₄ solutions
  • Salt bridge (U-shaped tube with brine)
  • External circuitry for electron flow
  • Basic design of all batteries/electrochemical systems

Electrostatic Work Theory

  • Work = nFε (n = moles, F = Faraday constant = 96,485 C/mol, ε = potential)
  • From physics: work = force · displacement = electric field · displacement
  • Work theorem: ΔG = W* (reversible work)
  • Extends beyond mechanical PdV work to electrical work

Nernst Equation Derivation

  • ΔG = -nFε (fundamental relationship)
  • Combined with reaction thermodynamics: ΔG = ΔG° + RT ln Q
  • Final form: ε = -(ΔG°/nF) - (RT/nF) ln Q
  • Couples electrostatics and chemistry → electrochemistry

Daniels Cell Application

  • ε = ε° - (RT/2F) ln([ZnSO₄]/[CuSO₄])
  • n = 2 electrons involved in redox
  • ε° = reference potential at 1 molal concentrations
  • Measurable cell voltage depends on concentrations

TwinMind

Get summaries like this for your own meetings

TwinMind takes notes in the background during meetings, lectures, and calls, then writes the summary for you.

Free plan to get started

No bot joins your calls

Phone, desktop & Chrome apps

Your next meeting, summarized like this

TwinMind listens in the background and turns meetings, lectures, and calls into searchable notes you can chat with. Start free.

Available on phone, desktop & Chrome

Your next meeting, summarized like this

TwinMind listens in the background and turns meetings, lectures, and calls into searchable notes you can chat with. Start free.

Available on phone, desktop & Chrome

Your next meeting, summarized like this

TwinMind listens in the background and turns meetings, lectures, and calls into searchable notes you can chat with. Start free.

Available on phone, desktop & Chrome