AI summary by TwinMind

Lecture 18: Neutral Particles

MIT OpenCourseWare

1h 7m 52s

Introduction to Neutral Particle Diagnostics

  • Core plasma ions well-confined → need technique to measure distribution function f(V_i) in core
  • Existing techniques inadequate:
    • Electron cyclotron emission: measures T_e ≠ T_i necessarily
    • Laser induced fluorescence: requires electrons in ions (core fully ionized)
    • Thompson scattering: measures electron distribution f_e(V) ≠ f_i(V)
  • Solution: core ions spontaneously turn into neutrals → escape confinement → detectable outside plasma

Neutral Transport Analysis

  • Two key problems: neutral production mechanism + neutral escape probability
  • Transport modeled as radiation transport: P(A→B) = exp(-∫α(l)dl)
  • Attenuation coefficient α includes three processes:
    • Electron impact ionization: σ_e cross-section
    • Ion impact ionization: σ_p cross-section
    • Charge exchange with ions: σ_c cross-section (resonant, large)
  • Velocity ordering: V_i << V_A << V_Te
  • Simplified expression: α ≈ (σ_p + σ_c)n_i for energetic neutrals
  • Example calculation: 10 keV neutrals, 10^20 m^-3 density → mean free path ~10 cm
  • Requirement for detection: line integrated density < 10^19 m^-2 → need "low density" tokamak

Neutral Production Mechanisms

  • Edge fueling: neutrals from scrape-off layer penetrate to core via charge exchange
    • Probability P_BA calculable from transport analysis
    • Creates detectable flux despite low penetration probability
  • Radiative recombination: negligible process
    • Balance: n_e·n_i·σ_r·v_e = n_e·n_a·σ_e·v_e
    • Steady state: n_a/n_i = σ_r·v_r/(σ_e·v_e) ≈ 10^-8 at 1 keV
    • Too low for detection
  • Neutral beam injection: active method using existing heating/current drive beams

Passive Charge Exchange Spectroscopy

  • Measurement setup: plasma → neutrals → stripping cell → magnetic analyzer → detector
  • Detector bins measure velocity distribution
  • Energy spectrum: log(intensity) vs particle energy shows:
    • Maxwellian region: slope = -1/T_i
    • Non-Maxwellian tail: fast ions from RF heating, runaways
  • Limitation: line-integrated measurement
  • Challenge: distinguishing core vs edge neutral contributions (use high-energy cutoff)

Active Neutral Beam Diagnostics

  • Neutral beam perpendicular to detector sight line
  • Localizes measurement to beam-plasma intersection
  • Uses existing heating/current drive beams
  • Limited to lower density machines (beam penetration requirement)

Charge Exchange Recombination Spectroscopy (CHERS/CXRS)

  • Process: neutral beam + fully stripped impurity A^Z+ → beam ion + A^(Z-1)+* → photon emission
  • Makes invisible impurities visible again
  • Measurements possible:
    • Impurity density from intensity (requires atomic models, absolute calibration)
    • Ion temperature T_i from Doppler broadening
    • Flow velocity V_flow from Doppler shift
  • Localized measurement from beam-detector intersection
  • Problems: charge exchange with edge impurities, bremsstrahlung background
  • Solution: beam modulation + phase-locked detection

Beam Emission Spectroscopy (BES)

  • Collisional excitation of beam neutrals by plasma electrons/ions
  • Intensity ∝ n_e (collisional excitation process)
  • Measures density fluctuations: I ∝ n_e + Δn_e(t)
  • Important for turbulent transport studies
  • Complications: must include all relevant atomic processes + beam attenuation
  • Can use standard heating beams or specialized diagnostic beams

Motional Stark Effect (MSE)

  • Lorentz transformation: beam velocity V_B in magnetic field B creates electric field E = V_B × B in beam frame
  • Linear Stark effect: energy shifts Δε ∝ |V_B × B|
  • Each energy level splits: Δε = (3nk/2) × (e²/4πε₀a₀Z²) × |E| × R_y
  • Quantum numbers: n = 1,2,3...; k = 0,±1,±2,...,±(n-1)
  • Transition used: n=3→n=2 (H_α, 656 nm) avoids vacuum UV (Lyman α at 121 nm)
  • Selection rules: Δm = 0,±1 → multiple allowed transitions → forest of spectral lines
  • Advantages over Zeeman effect: ~10× larger splitting, works with hydrogen
  • Polarization analysis: π-polarization ⊥ B, σ-polarization ∥ B
  • Application: current profile reconstruction via poloidal magnetic field measurement
  • Requires fast, unidirectional beam velocity for large, coherent splitting

TwinMind

Get summaries like this for your own meetings

TwinMind takes notes in the background during meetings, lectures, and calls, then writes the summary for you.

Free plan to get started

No bot joins your calls

Phone, desktop & Chrome apps

Your next meeting, summarized like this

TwinMind listens in the background and turns meetings, lectures, and calls into searchable notes you can chat with. Start free.

Available on phone, desktop & Chrome

Your next meeting, summarized like this

TwinMind listens in the background and turns meetings, lectures, and calls into searchable notes you can chat with. Start free.

Available on phone, desktop & Chrome

Your next meeting, summarized like this

TwinMind listens in the background and turns meetings, lectures, and calls into searchable notes you can chat with. Start free.

Available on phone, desktop & Chrome