AI summary by TwinMind
Lecture 25: Building Binary Phase Diagrams, Part III
MIT OpenCourseWare
50m 45s
Introduction and Setup
- Reverse engineering iron-chromium system using ThermoCalc software
- Continuation from previous session on Friday
- ThermoCalc running faster today due to pre-loaded system
- Last day of software demonstrations in lecture
- Upcoming schedule: Wednesday guest lecture from Professor Olson, Friday return to board work
ThermoCalc Phase Diagram Calculation
- Loading iron-chromium system in Fe demo database
- Software calculates generic phase diagram after system definition
- Creates simplified version by turning off all phases except BCC and liquid
- System calculates Gibbs free energy as function of composition and phase
- Performs tangent rope construction (inverse hull construction) to find tie lines
Simplified Iron-Chromium System Overview
- Drawing expected phase diagram features:
- Iron and chromium endpoints
- Spinodal region around middle composition
- Lens-like two-phase region
- Alpha (BCC) structure and liquid phases
- Spinodal occurs around 1000K at middle composition range
- Melting points:
- Chromium: T_melt = 2180K
- Iron: T_melt = 1810K
Pure Iron Modeling Theory
- Need to model melting at 1810K
- Gibbs free energy curves for alpha and liquid phases must cross at melting point
- G = H - TS relationship
- Required data types:
- Standard state data: S°, ΔH_form at 298K (zero for elements)
- Heat capacity data: CP_alpha(T), CP_liquid(T)
- Transformation data: ΔH_transformation, ΔS_transformation, T_melt
- Only two of three transformation quantities needed (interdependent)
Heat Capacity Modeling
- CP modeled as polynomials: CP = a + bT + c/T²
- Different coefficients for different phases
- Enthalpy model: H(T) with reference point at 298K (set to zero for elements)
- Entropy model: S(T) with standard entropy and heat capacity integration
- Slopes: dH/dT = CP, dS/dT = CP/T
ThermoCalc Data Extraction
- Created pure iron calculator with mole fraction XFe = 1
- Plotted Gibbs free energy, enthalpy, and entropy vs temperature
- Estimated transformation enthalpy by mousing over plot values
- Calculated ΔH_melting ≈ 14 kJ/mol (72,416 - 58,445)
- Estimated ΔS_melting ≈ 7 J/mol·K
- Literature value: ΔS_transformation = 7.6 J/mol·K (good agreement)
Heat Capacity Data Analysis
- Exported enthalpy data to MATLAB for curve fitting
- Low temperature phase: fitted to second-order polynomial
- Liquid phase: fitted to first-order polynomial (linear, CP ≈ 47 J/mol·K)
- Heat capacity = derivative of enthalpy polynomial
- Typical liquid metal heat capacity: 45-50 J/mol·K
Solution Modeling
- Simple regular solution model with one adjustable parameter
- ΔH_mix = a·X₁·X₂
- Calculated at 1000K as function of composition
- Extracted parameters by inspection:
- H°_Fe ≈ 24.8 kJ/mol
- H°_Cr ≈ 19.5 kJ/mol
- H at X_Cr = 0.5 ≈ 29 kJ/mol
- Regular solution parameter a ≈ 28 kJ/mol for BCC phase
Complete Modeling Framework
- Pure component models (Fe, Cr) for each phase
- Solution models for liquid and solid phases
- Feed into free energy-composition diagrams
- Common tangent construction yields phase diagrams
- Process: Pure component models → Solution models → Free energy diagrams → Phase diagrams
Three-Phase System Animation
- Demonstrated web-based app showing animated phase diagram construction
- Two-lens system with liquid, alpha, and beta phases
- Temperature sweep showing:
- Alpha to beta transformation
- Sequential melting from left to right
- Common tangent evolution painting two-phase regions
- 20K temperature steps creating tie line density
