AI summary by TwinMind

Lecture 7: Photovoltaic cells

MIT OpenCourseWare

1h 18m 31s

PN Junction Fundamentals and Space Charge Region

  • Two semiconductors: n-type (high electron concentration) and p-type (high hole concentration)
  • Electrons jump from n-side to p-side, holes jump from p-side to n-side
  • Creates space charge region with electric field
  • Under solar radiation, generates voltage when circuit closed
  • Electron-hole pairs generated within space charge region get separated by electric field
    • Electrons move to lower energy (n-side)
    • Holes move to higher energy (p-side)
  • Accumulation creates voltage difference, drives current flow

Diode vs Solar Cell Operation

  • Forward bias: diode current flows, recombination occurs
  • Solar illumination: photocurrent (JL) flows opposite to diode current
  • Short circuit current: voltage = 0, current = JL
  • Open circuit voltage: current = 0, voltage determined by balance
  • Real operation: load resistance controls operating point for maximum power

Minority vs Majority Carrier Devices

  • Schottky barrier: majority carrier device (electron remains electron)
  • PN junction: minority carrier device requiring recombination
  • In PN junction: electrons from n-side must recombine with holes on p-side
  • Recombination time (τ) crucial for performance
  • Longer recombination time → smaller saturation current (JS) → higher open circuit voltage
  • Heat generation occurs outside space charge region during recombination

Shockley-Queisser Limit Theory

  • Maximum theoretical efficiency for single junction solar cells
  • Based on detailed balance between absorption and spontaneous emission
  • Only radiative recombination considered (no defects)
  • Saturation current formula includes:
    • Band gap energy (EG)
    • Refractive index (n²)
    • Temperature dependence
  • Optimal band gap ≈ 1.4-1.5 eV
  • Maximum efficiency ≈ 31% under one sun concentration
  • Higher concentration increases efficiency due to logarithmic voltage increase

Multi-Junction Solar Cells

  • Stack multiple cells with different band gaps
  • Top layer absorbs high energy photons, transmits low energy
  • Current matching requirement: all cells must generate same current
  • Material challenges: lattice matching to avoid defects/dislocations
  • Spectral efficiency laboratories achieving 40-41% efficiency
  • Theoretical limit with infinite junctions ≈ 86%
  • Cost vs efficiency tradeoff limits practical deployment

Practical Solar Cell Technologies

Silicon Solar Cells

  • Dominant technology: single crystal, multi-crystal, amorphous
  • Silicon challenges:
    • Indirect band gap → weak absorption near band edge
    • Requires thick material (10+ μm for adequate absorption)
    • Expensive purification: $2/kg raw → $40/kg solar grade
  • Surface texturing reduces reflection
  • Back surface field improves collection
  • Laboratory efficiency: 25-27% (close to Shockley limit ≈ 31%)

Thin Film Technologies

  • Amorphous silicon: 200 nm thick, poor electron mobility
  • CIGS (Copper Indium Gallium Selenide): 19% laboratory efficiency
  • CdTe: First Solar manufacturing cost $1/watt, 12% deployed efficiency
  • Advantage: less material usage, lower cost
  • Disadvantage: lower efficiency, stability issues

Emerging Technologies

  • Organic photovoltaics: exciton separation challenges
  • Dye-sensitized cells: TiO₂ nanostructures with photosynthetic dyes
    • Electron transport through nanoparticles
    • Hole transport through liquid electrolyte
    • Chemical reactions at interfaces

Key Performance Limitations

  • Recombination centers: impurities, defects, grain boundaries
  • Absorption vs collection tradeoff
  • Material costs vs efficiency optimization
  • Series resistance losses
  • Reflection losses
  • Current matching in multi-junction systems

Cost and Market Reality

  • Manufacturing cost: $1/watt (First Solar CdTe)
  • Payback time considerations
  • Global production: 67 GW/year current, 100+ GW/year China capacity
  • Technology generations:
    • Gen 1: Silicon (high efficiency, high cost)
    • Gen 2: Thin films (lower efficiency, lower cost)
    • Gen 3: Advanced concepts (target: high efficiency, low cost)

TwinMind

Get summaries like this for your own meetings

TwinMind takes notes in the background during meetings, lectures, and calls, then writes the summary for you.

Free plan to get started

No bot joins your calls

Phone, desktop & Chrome apps

Your next meeting, summarized like this

TwinMind listens in the background and turns meetings, lectures, and calls into searchable notes you can chat with. Start free.

Available on phone, desktop & Chrome

Your next meeting, summarized like this

TwinMind listens in the background and turns meetings, lectures, and calls into searchable notes you can chat with. Start free.

Available on phone, desktop & Chrome

Your next meeting, summarized like this

TwinMind listens in the background and turns meetings, lectures, and calls into searchable notes you can chat with. Start free.

Available on phone, desktop & Chrome