AI summary by TwinMind
Lecture 8: Radiative heat transfer
MIT OpenCourseWare
1h 18m 31s
Course Introduction and Heat Transfer Fundamentals
- Course shifting focus to solar energy applications, particularly solar thermal electric systems
- System perspective crucial for overall efficiency - spectral control is key
- Review of three heat transfer modes:
- Conduction: power proportional to thermal conductivity and temperature gradient
- Convection: characterized by coefficient H, proportional to temperature difference between wall and fluid
- Thermal radiation: Stefan-Boltzmann law for black body radiation, view factors and emissivity for surface-to-surface transfer
Thermal Radiation Theory and Black Body Physics
- Intensity definition: power leaving surface per unit solid angle per unit area normal to propagation direction
- Solid angle concept: 4π steradians for complete sphere (analogous to 2π radians in 2D)
- Emissive power relationship: power = intensity × area × cosine(θ) × solid angle integration
- For black body radiation: intensity is isotropic (same in all directions)
- Integration yields: emissive power = π × intensity for isotropic radiation
- Planck's law can be written in intensity or emissive power form
- Wien's displacement law: λmax × T = 2898 μm·K
- Solar temperature ≈ 6000K, human body ≈ 300K (10 μm peak emission)
- Stefan-Boltzmann integration gives total emitted energy
Universal Black Body Radiation Functions
- Normalized spectral power by T⁴ creates universal function of λT only
- Fractional energy function F(λT) shows energy between 0 and λ for any temperature
- Example calculation: Silicon bandgap 1.1 μm at 6000K solar temperature
- λT = 6000 × 1.1 = 6600 μm·K
- ≈75% of solar energy above bandgap, 25% below (unusable for photovoltaics)
- Energy below bandgap only heats solar cell (performance degradation)
Solar-Earth Geometry and Solar Constant
- Sun diameter: 1.4 × 10⁹ m
- Earth diameter: 12-13 × 10⁶ m
- Sun-Earth distance: 1.5 × 10¹¹ m
- Earth's orbital variation affects solar flux (lowest in June/July despite summer)
- Earth's axis tilt: 23.5° from perpendicular creates seasons
- Solar tracking complexity due to Earth's rotation and tilt
- Black body radiation from Sun reaches Earth at ≈1366 W/m² (solar constant)
- Close agreement using 5777K effective solar temperature
Atmospheric Effects and Solar Spectra
- Solar radiation modified by atmospheric absorption, scattering, reflection
- Air mass (AM) definitions:
- AM0: outside atmosphere
- AM1: sun directly overhead
- AM1.5: sun at 48.2° angle (1/cos(48.2°) = 1.5× atmosphere thickness)
- AM1.5 Global (G): includes direct + diffuse + ground reflection
- AM1.5 Direct: 2.5° cone around sun, panel tilted 37°
- Standard test conditions use AM1.5G spectrum
- Major atmospheric absorbers:
- Water vapor: worst absorption
- CO₂: 10 μm band (greenhouse concern)
- Rayleigh scattering: ∝ frequency⁴ (blue sky)
- Solar constant reduces from 1366 W/m² (AM0) to ~900 W/m² (AM1.5)
Surface Radiation Properties
- All surface properties are spectral and directional dependent
- Directional spectral emissivity: ε'λ(θ,φ,T,material,surface finish)
- Hierarchy of properties:
- Directional spectral → hemispherical spectral → directional total → hemispherical total
- Kirchhoff's law: ε'λ = α'λ (directional spectral emissivity = absorptivity)
- Only fundamental level equality - higher order properties not necessarily equal
- Diffuse surface: intensity same in all directions
- Gray surface: properties independent of wavelength
- Energy conservation: αλ + ρλ + τλ = 1 (absorptivity + reflectivity + transmissivity)
View Factor Calculations
- View factor F₁₂: fraction of power leaving surface 1 intercepted by surface 2
- Integration formula involves solid angles and projected areas
- Reciprocity relation: A₁F₁₂ = A₂F₂₁
- Summation rule: ΣF₁ⱼ = 1 (energy conservation)
- Sun-Earth view factors:
- Earth to Sun: FSE = πRE²/(4πd²) (very small)
- Sun to Earth: FSE = πRE²/(4πRS²) (larger due to reciprocity)
Solar Constant Verification
- Calculation: σT⁴ × (4πRS²) × FSE = σ(5777K)⁴ × view factor
- Result: 1365 W/m² (matches measured solar constant)
- Confirms 5777K effective solar temperature
Maximum Solar Energy Conversion Efficiency
- Carnot efficiency limit: η = 1 - TEarth/TSun = 1 - 300/5777 ≈ 95%
- Practical thermal conversion with black body absorber/emitter:
- Heat transfer: σ(TS⁴ - T⁴)
- Thermal efficiency: 1 - T⁴/TS⁴
- Combined efficiency: [1 - T⁴/TS⁴][1 - TEarth/T]
- Maximum ≈85% at T ≈ 2450K
- Broad optimum: 70-85% efficiency range
- Comparison with conventional power:
- Coal plants: ~40%
- Combined cycle gas turbine: ~60%
- Internal combustion engines: 25-30%
Selective Surface Analysis
- Ideal step-function absorptivity: α = 1 for λ < λc, α = 0 for λ > λc
- Energy balance: absorbed solar = emitted thermal + losses
- Shorter cutoff wavelength λc → higher achievable temperature
- Without concentration, maximum temperatures:
- λc = 1.5 μm: ~2300K
- λc = 1.0 μm: ~3600K
- Real selective surfaces have gradual transitions, not sharp cutoffs
Realistic Selective Surface Performance
- Choose cutoff where solar and thermal spectra intersect at operating temperature
- Thermal efficiency calculation includes spectral losses
- Combined system efficiency ≈30% with realistic surfaces
- Optimal operation at moderate temperatures (800-1200K)
- Trade-off between thermal efficiency (favors low T) and Carnot efficiency (favors high T)
Concentration Effects and Engineering Challenges
- Higher concentration → higher achievable temperatures
- Black body vs selective absorber performance comparison
- Engineering challenges for high-temperature operation:
- Structural support at 2000K+
- Thermal losses through supports
- Material degradation
- Suspension systems to minimize conduction losses
- Solar advantage over combustion: no corrosive gas contact, simpler structural requirements
System Integration Considerations
- Spectral control transforms multi-junction solar cell complexity into thermal management complexity
- Single junction solar cells limited by Shockley-Queisser limit (~28% for silicon)
- Multi-junction cells reach ~41% (3-junction), theoretical limit ~85% (infinite junctions)
- Thermal approach: achieve high efficiency with single conversion device + selective surfaces
- Real systems must account for:
- Non-ideal surface properties
- Parasitic heat losses
- Mechanical support structures
- Thermal cycling effects
