AI summary by TwinMind

Lecture 9: Case Studies - Specific Heats and Phase Transformations

MIT OpenCourseWare

49m 14s

Heat Capacity as Key to Thermal Kingdom

  • Heat capacity not just another coefficient - essential for solving Material Science problems
  • Free energy equilibrium at fixed T and P balances enthalpy (H) and entropy (S)
  • Need to calculate H and S for given phase at specific temperature and pressure

Calculating Enthalpy H(T) at Fixed Pressure

  • Start with H = U + PV
  • DH = dU + P dV + V dP (chain rule)
  • Use combined statement: dU = T dS - P dV
  • Results in DH = T dS + V dP
  • At fixed P: DH = T dS = dQ_reversible = CP dT
  • Fundamental theorem of calculus: H(T2) = H(T1) + ∫(T1 to T2) CP(T) dT
  • Need heat capacity data (temperature dependent) for calculations

Calculating Entropy S(T) at Fixed Pressure

  • dS = CP/T dT - β α dP (derivable from Table 4.5)
  • At fixed pressure: dS = CP/T dT
  • S(T2) = S(T1) + ∫(T1 to T2) CP(T)/T dT
  • Again requires CP as function of temperature

Heat Capacity Models for Real Materials

  • Ideal gases: simple forms (5/2 R for monatomic)
  • Real materials: more complex - consider bonds as atoms on springs
  • Bond energy U(r) vs atomic spacing - equilibrium at R_not
  • Low temperature: atoms quiescent (lower energy, lower entropy)
  • High temperature: atoms vibrating around minimum (higher energy, higher entropy)

Vibrational Models

  • Einstein model: all vibrations same frequency (simple, first quantum theory test)
  • Debye model: range of available vibration frequencies and wavelengths
  • Will solve these models later using statistical mechanics

Heat Capacity Data Examples

  • Aluminum CV vs reduced temperature (T/Θ_Debye)
  • Einstein and Debye models show:
    • Heat capacity → 0 at zero temperature
    • Saturation at high temperature
    • Debye model more accurate than Einstein
  • Lead, silver, aluminum, diamond comparison:
    • Different absolute values at same temperature
    • Self-similarity in curve shapes
    • Diamond has higher energy characteristic lattice vibrations
    • All converge to ~3R (Dulong-Petit law) at high temperature

Dulong-Petit Law

  • Empirical observation: heat capacity converges to 3R for all solids at high temperature
  • R = 8.314 J/(K·mol), so 3R ≈ 24-25 J/(K·mol)
  • Good estimate for solid heat capacity when no data available
  • CV and CP very similar for solids at atmospheric pressures

Cobalt Phase Diagram Case Study

  • Unary phase diagram: 4 phases total
    • 3 solid phases: HCP non-magnetic, FCC ferromagnetic, FCC paramagnetic
    • 1 liquid phase
  • Transformation temperatures: ε→γ, magnetic transition (Curie), melting point
  • High pressure data (gigapascals scale)

Cobalt Heat Capacity Data (NIST)

  • Three different temperature ranges due to different phases
  • Polynomial expressions: A + BT + CT² + DT³ + E/T²
  • Empirical curve fitting (not first principles)
  • Range of validity critical - coefficients only good within fitted range
  • Heat capacity higher than Dulong-Petit (~25) - reaches 55 J/(K·mol)

Magnetic Contributions to Heat Capacity

  • Energy can be partitioned beyond lattice vibrations:
    • Molecular rotation
    • Conduction electron states
    • Magnetism (key for cobalt)
  • Ferromagnet scenarios:
    • Low T: magnetic moments aligned and quiescent (lower energy/entropy)
    • High T: magnetic moments fluctuating (higher energy/entropy)
  • Magnons: excitations of magnetic structure (analogous to phonons)
  • Spike at Curie temperature from magnetic fluctuations
  • Excess heat capacity above Dulong-Petit largely from magnetic interactions

Phase Transformations - Silicon Example

  • Solid to liquid transformation in silicon
  • ΔH_solid→liquid = +50.2 kJ/mol at T_melting = 1685 K (endothermic)
  • Question: What is ΔH for T < T_melting?
  • Industrial relevance: solidification often occurs below melting point

Thermodynamic Calculation Framework

  • H_solid(T) = H_solid(T_m) + ∫(T_m to T) CP_solid(T') dT'
  • H_liquid(T) = H_liquid(T_m) + ∫(T_m to T) CP_liquid(T') dT'
  • ΔH_solid→liquid(T) = ΔH_solid→liquid(T_m) + ∫(T_m to T) ΔCP(T') dT'
  • Heat capacity differences crucial for phase transformations

Silicon Data Sources and Analysis

  • Data available: textbook appendix, NIST, SpringerMaterials, Wikipedia
  • Silicon diamond cubic structure (DIA) to liquid (L)
  • ΔS_transformation = 29.8 J/(K·mol), ΔH_transformation = 50.2 kJ/mol
  • Heat capacity data plotting reveals:
    • Liquid silicon: essentially constant CP
    • Solid silicon: linear increase with temperature
  • Data reliability concerns: liquid data may not be valid far below T_m, solid data may not be valid far above T_m

NIST Data Format and Modeling

  • Standard form: CP = A + BT + CT² + DT³ + E/T²
  • Temperature normalized: T = T_actual/1000K
  • Empirical curve fitting (not quantum first principles)
  • Silicon coefficients:
    • Solid: A = 22.82, B = 3.90 (others ≈ 0)
    • Liquid: A = 27.2, B ≈ 0 (constant)
  • Simplified model by inspection: ignore higher-order terms

Final Calculation Results

  • ΔCP_solid→liquid(T) = (A_liquid - A_solid) - B_solid × (T/1000K)
  • ΔH_solid→liquid(T) = ΔH_solid→liquid(T_m) + polynomial integral
  • Critical for silicon solidification in computer chips and solar cells
  • Data probably only reliable close to melting point

Course Integration

  • Friday: introduction to unary phase diagrams
  • Regular calculations of transformation quantities
  • "3 D's of Thermodynamics" lecture resource for notation clarity
  • Different meanings: d (differential), Δ (finite change), D (partial derivative)

TwinMind

Get summaries like this for your own meetings

TwinMind takes notes in the background during meetings, lectures, and calls, then writes the summary for you.

Free plan to get started

No bot joins your calls

Phone, desktop & Chrome apps

Your next meeting, summarized like this

TwinMind listens in the background and turns meetings, lectures, and calls into searchable notes you can chat with. Start free.

Available on phone, desktop & Chrome

Your next meeting, summarized like this

TwinMind listens in the background and turns meetings, lectures, and calls into searchable notes you can chat with. Start free.

Available on phone, desktop & Chrome

Your next meeting, summarized like this

TwinMind listens in the background and turns meetings, lectures, and calls into searchable notes you can chat with. Start free.

Available on phone, desktop & Chrome