AI summary by TwinMind
Lecture 9: Minimum Work of Partitioning Small Systems; The Gibbs Phase Rule; The Van der Waals Model
MIT OpenCourseWare
1h 38m 11s
Simple System Model Fundamentals
- Simple system model crucial for acquiring microscopic limit
- Framework for most thermodynamics developed until ~20 years ago
- Wall effects cause rarefaction because particle density → 0 at walls
- Rarefaction effects important when removing partitions
- Leave "hole" or rarefaction area spontaneously filled by particles
- Creates irreversible spontaneous process
- In many-particle limit: stable equilibrium state curves converge
- Partitioned system curve approaches non-partitioned system curve
- Rarefaction effects become negligible
- Examples: 10^5 particles at extremely cold temperatures
- Normal temperatures: 10-20 particles make rarefaction effects negligible
- Model applicable to macroscopic, mesoscopic, microscopic systems (not just few molecules)
Homogeneous Functions and Euler Relation
- Fundamental relation = homogeneous function of first degree in all variables
- Mathematical condition: U(λS, λV, λN₁, λN₂, ...) = λU(S, V, N₁, N₂, ...)
- Euler relation derivation:
- Take partial derivative with respect to λ
- Set λ = 1 to obtain Euler relation
- Partial derivatives = homogeneous functions of degree zero
- Temperature of system with given S,V,N equals temperature with S/λ, V/λ, N/λ
- Small or large systems: same temperature if relative amounts equal
Specific Properties and Euler Free Energy
- Specific properties defined using Euler relation
- Specific energy = energy/n
- Function of specific entropy, specific volume, mole fractions
- Partial derivative ∂U/∂n = -1/n² × Euler free energy
- Euler free energy = characteristic function
- Still valid for small systems
- Differential: amount of constituent = ∂(Euler free energy)/∂(chemical potential)
- Possible procedure to measure Euler free energy for small systems using molecular dynamics
Partitioning Work and Physical Interpretation
- Cost of dividing system into λ partitions
- Minimum work to introduce partitions = difference between partitioned and non-partitioned energy
- Work to add/remove one partition = Euler free energy of each partition
- Physical interpretation: partitions move particles away, creating space
- Mathematics: ∂W/∂λ computation yields Euler free energy
- Another physical interpretation of Euler free energy
Extensive and Intensive Properties
- Extensive property: homogeneous function of first degree
- Examples: energy, entropy, volume, amounts, enthalpy, Gibbs free energy, heat capacities, mass
- Enthalpy not additive for different pressure systems
- But extensive in simple system when intensive properties divided by same number
- Intensive properties: no λ multiplier in homogeneity relation
- Examples: T, P, chemical potentials, all specific properties
- Intensive state = list of all intensive property values
- Intensive state + one extensive property → completely fixed state
Phase Equilibrium and Gibbs Phase Rule
- Simple system model allows coexistence of different intensive states
- Example: boiling water with liquid-vapor coexistence
- Phase = collection of system parts with same intensive state
- Conceptual partition insertion at liquid-vapor interface (cost-free)
- Reorganization into separate homogeneous phases
- Gibbs Phase Rule derivation:
- Variables: T, P, mole fractions for each phase
- Constraints: Σyᵢ = 1 for each phase, μᵢ^α = μᵢ^β for all components
- Variance = R + 2 - Q (R = components, Q = phases)
- Additional constraint for Z independent chemical reactions
Phase Rule Applications
- Pure substance (R=1): variance = 3 - Q
- Single phase: variance = 2 (can change T and P independently)
- Two phases: variance = 1 (saturation relation between T and P)
- Three phases: variance = 0 (unique triple point)
- Critical point: no liquid-vapor distinction above
- P-T diagram analysis for water phases
Clausius-Clapeyron Relation
- Slope of saturation line: dP/dT = hfg/(T×sfg)
- Derived from chemical potential equality condition
- For pure substance: μ = g = h - Ts
- Chemical potential equality → enthalpy of phase change/entropy of phase change
- Connects pressure-temperature slope to latent heat properties
Two-Phase Property Calculations
- Composite system of subsystems (one per phase)
- Additive properties: V = V₁ + V₂, U = U₁ + U₂, S = S₁ + S₂
- Enthalpy additive when same pressure
- Vapor fraction (steam quality): x = mg/(mg + mf)
- Specific properties: u = (1-x)uf + x×ug = uf + x×ufg
- Steam table properties: subscripts f (liquid), g (vapor), fg (difference)
Ideal Models
- Ideal incompressible solid/fluid:
- Specific volume ≈ constant
- α ≈ 0, κ ≈ 0
- cp = cv = c(T only)
- u = u(T), s = s(T), h = h(T,P)
- Ideal gas model:
- PV = nRT
- κT = 1/P, αP = 1/T
- cp = cv + R (Mayer relation)
- u = u(T), h = h(T), s = s(T,P)
Degrees of Freedom and Specific Heats
- Each degree of freedom contributes ½R to cv
- Translational (3 DOF): cv = 3R/2, γ = 5/3 = 1.67
- Diatomic molecules (5 DOF): cv = 5R/2, γ = 7/5 = 1.4 (O₂, N₂, air)
- Complex molecules (6 DOF): cv = 3R, γ = 4/3 = 1.33 (CO₂, H₂O)
- Higher temperatures activate vibrational and electronic modes
Van der Waals Equation and Metastable States
- Modified ideal gas: (P + a/V²)(V - b) = RT
- Accounts for molecular volume (b) and attractive forces (a)
- Critical point relationships determine a, b parameters
- Predicts liquid-vapor coexistence qualitatively
- Metastable states possible between saturation dome and spinodal curve
- Spinodal curve = locus of stability limits
- Cavitation phenomenon in steam turbines
Flow Exergy Analysis
- Maximum work from bulk flow: exergy = (h₁ - ha) - Ta(s₁ - sa)
- Environment provides:
- Sink for mass at ambient conditions
- Entropy reservoir for reversible processes
- Minimum work for material processing: same exergy expression
- Heat pump analogy for entropy supply from environment
