AI summary by TwinMind
Recycling Skateboards Into Guitars | How It's Made
Science Channel
5m 12s
Material Selection and Preparation
- Active skateboarders damage decks beyond repair every few months
- Instead of landfill disposal, boards reclaimed for guitar manufacturing
- Skateboards made of multiple layers rock maple (traditional guitar tone wood)
- Guitar maker evaluates condition and color of boards before selection
Grip Tape Removal Process
- Heat gun applied to grip tape on top to soften adhesive
- Razor used to prize edges of softened tape away from board
- Tape pulled off skateboard completely
- Better assessment of board damage possible after removal
- Sanding removes adhesive and graphics
- Turquoise dye color penetrates wood, becomes intrinsic appeal feature
Board Preparation and Cutting
- Nose and tail sections cut off and discarded
- Only wheel basis section used for guitar construction
- Five skateboards laminated together using liberal glue coat
- Putty knife spreads glue for complete coverage
- Stack placed in hydraulic clamp with wooden board protection
- Clamp squeezes skateboard sandwich as glue sets
- Day-long curing process required
Lamination and Shaping
- Blade shaves laminated stack surface smooth, brings out grain
- Stack edges trimmed for evenness
- Zig-zag glue pattern applied to side edges
- Second skateboard stack joined and clamped
- Fused blocks large enough for electric guitar body crafting
- Pencil traces guitar template outline onto laminated boards
- Bandsaw cuts out guitar shape
- Skateboard colors form random pattern within body
Body Refinement and Cavity Creation
- Template secured with double-sided tape
- Router refines profile for smoother guitar lines
- Different pattern guides cavity routing and drilling
- Cavities accommodate guitar neck, electronics, and bridge
- Template removed for inspection
- Cavity edges sanded smooth
- Multiple holes drilled in back for neck attachment
- Input jack hole bored with guitar body clamped steady
Neck Construction and Finishing
- Guitar neck crafted from reclaimed skateboards
- Aggressive filing shapes neck to desired profile
- Extensive sanding of entire neck and body
- Clear gloss coating applied (first of 7-8 coats)
- Sanding between each coat required
- Lacquering process takes 3 weeks including curing time
- Wet sanding and buffing creates mirror finish
Final Assembly
- Neck nestled in hollow space at guitar body front
- Screws secure neck from back of guitar
- Recycled skateboard guitar ready for assembly and wiring
- Complete transformation takes one month
- Final product trades halfpipe for stage performance
