AI summary by TwinMind
Semiconductor Immersion Lithography
Asianometry
16m 29s
Introduction and Context
- 193 nanometer immersion lithography (193i) often overshadowed by EUV discussion
- Developed in early 2000s, exceeded industry expectations
- Still workhorse technology at core of many leading edge process nodes
Technical Fundamentals
- Core principle: Replace air gap between wafer and machine with water
- Resolution improvement: Uses Rayleigh formula (λ/NA)
- Increases numerical aperture (NA) from 0.93 to 1.35+
- Collects and focuses more light for better resolution
- Historical roots: Derives from 1840s immersion microscopy by Giovanni Batista Amici
Early Development History (1980s-1990s)
- 1984: Hitachi employees filed US patent for liquid between lens and photoresist
- 1985: Werner Tabarelli and Ernst Löbach (Perkin Elmer) patented lens directly in water
- 1987: Bern Lin (IBM) proposed enhancing depth of focus for 249nm lithography
- 1989: Hiroaki Kawata team (University of Osaka) first demonstration at 453nm wavelength
- Technology receded into background as industry focused on 193nm development
Industry Pivot (2002-2003)
- Summer 2002: Sematech sponsored 157nm lithography workshop
- Bern Lin's pivotal speech:
- Now TSMC R&D executive
- Originally planned to discuss 157nm extension
- Instead declared 157nm "emperor had no clothes"
- Proposed applying immersion to existing 193nm technology
- $2 billion already invested across supply chain in 157nm
- December 2002: Sematech organized follow-up seminar on 10 essential hurdles to 193i
- May 2003: Intel dropped 157nm, industry followed
- First time industry transitioned from one wavelength to same wavelength
Market Criteria and Competition
- Three key criteria:
- Resolution: Pattern increasingly smaller lines
- Accuracy: Pattern without errors
- Productivity/throughput: Wafers processed per hour
- ASML TwinScan machines gained advantage through superior throughput vs Nikon/Canon
Immersion Fluid Selection
- Chosen fluid: Ultrapure water (all three lithography makers)
- Alternative considered: Perfluoropolyether (aerospace liquid lubricant)
- Water criteria met:
- No physical damage to wafer/lens/coatings
- Flows freely
- Minimal UV light absorption
- Low bubble formation susceptibility
- Water already used in wafer fabrication
- Later generations used different fluids (hydrogen phosphate, aluminum chloride)
Water Delivery Systems
- Wafer-based configuration (rejected):
- Wafer immersed in circulating tank
- Required filling/emptying entire bath each cycle
- Slowed throughput, required substantial machine redesign
- Shower configuration (adopted):
- Water pumped only over exposed wafer area
- Suction picks up water after lens passes
- Less water usage, integrated into existing 193nm machines
- No waiting for bath fill/empty cycles
Technical Challenges and Solutions
Water Flow Management
- Consistent water flow maintenance
- Complete water removal to prevent residue
- Prevention of water marks around lens area
- Edge challenges:
- Wafer edge yields already 50% of rest of wafer
- Water leakage through cracks at edges
- Risk of vacuum creation underneath wafer
- Potential wafer suction to tray and contamination
Bubble Formation Issues
- Movement factors:
- Wafer movement ~500mm/second during exposures
- Rapid water pumping on/off wafer
- Bubble problems discovered:
- 1-150 micrometer size bubbles (2x human hair width)
- Photon scattering effects
- Flare imaging artifacts on chip
- Weakened DUV beam power
- Solution: Degassing water before immersion zone entry
- Now regular part of ultrapure water generation cycle
Contamination and Leaching
- Water contamination risks:
- Contaminant transfer between wafer and optics lens
- Photoresist chemical component leaching
- Potential resist UV light absorption loss
- Solutions developed:
- Protective "top coat" layers on wafer (adds complexity)
- Hydrophobic/waterproof photoresist modification
- Self-segregating photoresists with waterproof features activated after spin/bake
Optical System Development
- Zeiss optics partnership: Brand new optic system required
- System evolution:
- Old DUV: Pure refractive/dioptric lens system
- Higher NA requirement: 6x system size increase unacceptable
- Solution: Catadioptric system (lenses + mirrors)
- Mirror challenges:
- Beam splitting into original and reflective twin
- Interference prevention between beams
- Vibration and polarization issues
- Final design: Inline catadioptric system with carefully arranged multiple mirrors
Commercial Timeline and Market Impact
- 2003: ASML shipped first prototype TwinScan XT 1150i
- 2003: Pre-production dry ARF tool XT 1250i
- 2006: First volume immersion stepper XT 1700i
- Competition:
- Canon never shipped first generation tool
- Nikon first prototype October 2004 (2 years after ASML)
- Later generations: NA raised to 1.92, 40nm feature patterning capability
- 2010: ASML sold 100th immersion DUV tool
- ASML gained market share dominance through this technology
Current Status and Future
- Leading systems: ASML XT 1900 series (introduced decade+ ago)
- Capability: Reaches N7 node, one generation from leading edge EUV
- Ongoing development: ASML and Nikon still refining with regular iterations
- Industry position: 193i remains workhorse technology
- EUV comparison: Indications EUV may never become the workhorse 193i currently is
- Still considered state-of-the-art technology
