AI summary by TwinMind
We hit a drone with lightning
Tom Scott
5m 31s
Lab Introduction & Setup
- University of Manchester high-voltage test lab - UK's largest multi-purpose facility
- Equipment: impulse generator capable of 2 million volts
- Lab uses: testing electrical assets, design research, teaching
- Historical use: testing lightning effects on aircraft
- First-time experiment: testing drone response to lightning strike
Capacitor System Configuration
- 20 red capacitor boxes in tower formation
- Each box stores 100,000 volts
- Total capacity: 2 million volts when triggered
- Power flow: through resistors → brown wire → single point → air gap → ground rod
- Target: drone positioned in strike path
First Lightning Strike Test
- Initial strike delivered to drone
- Results observed:
- Drone not significantly hot after strike
- Entry point: through metal propeller
- Exit point: through plastic handles (sharp points create high electric field)
- Current path: through motors and electronics
- Electronics "fried" but battery protected
- Battery protection: metal casing acts as Faraday cage
Analysis & Recommendations
- Battery survived due to metal casing protection
- All surrounding electronics destroyed
- Recommendation: install lightning interceptor
- Metal electrode protruding from top
- Metal tape on protruding parts
- Designed to attract lightning away from sensitive components
Second Test with Lightning Rod
- Added lightning protection system to drone
- Strike delivered with protection in place
- Results:
- Lightning completely bypassed the lightning rod
- Strike hit propeller again at same exit point
- Plastic charring visible similar to first test
- Lightning behavior demonstrated as unpredictable
Lightning Physics Explanation
- Streamers: high-voltage discharge paths that form upward
- Channel formation: occurs when upward and downward streamers connect
- Current flow: follows established channel path
- Unpredictable nature: lightning doesn't always follow expected paths
